GL&V offers the most extensive cleaner portfolio for the separation of heavy and light reject as well as dearation.
+ for heavy and light rejects
+ for wastepaper and pulp
+ for consistencies up to 2%
+ as fibre recovery stage
+ as high density cleansers
This is the most modern cleaner in our product program. This cleaner delivers high separation efficiency on heavy contaminants while also providing for a high rate of separation efficiency of air and light weight contaminants. The cleaner system is built with satellites which can easily be adjusted to variations in flow rate.
GL&V''s new Celleco Twister® hydrocyclone is the latest development in separation technology and is the only true 2% fiber consistency hydrocyclone on the market. The Celleco Twister''s innovative design and state-of-the-art technology makes it a high-performance, high-consistency product utilizing less energy.
A universal cleaner used in a variety of applications both in virgin fiber, waste paper and kraft pulp lines and in approach flow systems ahead of paper machines. The cleaner is designed for heavy particle separation and separation of unfibrillated fibres.
This cleaner is designed primarily for light weight separation in recycled fiber systems. It ensures a high separation efficiency of particles in sizes from 0.002 mm and up. 2 versions are available: Cleanpac 270R for light weight removal, or Cleanpac 270RT for light weight removal and thickening of the accept.
The Celleco Tripac 90 was designed mainly for the cleaning of bleached and semi-bleached kraft pulp, for the removal of particle less than 100 microns, and for the cleaning of waste paper in deinking systems. The units are a compact canister design and offers high cleaning efficiency, extended runnability and operate at a relatively low pressure drop.
The Tripac 90 Reverse hydroclone form an efficient system for removing lightweight contaminants, such as plastics, hot melts, waxes and styrofoams. The system also remove shives and pitch formations efficiently. The Tripac Reverse is designed to be located either before or after the Tripac heavy reject cleaner system.
The Albia 500 Satellite Cleaner System for secondary or virgin fibre is a robust, hard wearing cleaner offering good runnability at higher consistency levels of fibre. The Albia 500 is ideal for cleaning recycled paper such as DIP-system and contaminant loaded furnishes.
The Albia FRB is a discontinuous rejecting cleaner used in the finalstage of any hydrocyclone plant system intended for the recovery offibers and fillers where the contaminants are on the coarser side.
The FMZ™ single is a continuous rejecting cleaner used in the final stage of GL&V hydrocyclone plant system intended for the recovery of fibers and fillers. It can also under certain circumstances be used as a final stage with other pressurized cleaners as well. Further fiber savings can be had with the Albia FRB / CLP700 FRB cleaners where fine debris removal is of less importance.
The Celleco™ Cleanpac® Clear Line technology was developed for easier maintenance of your cleaner plant. Currently available for the Cleanpac 350 and Cleanpac 700 series.
CRC Bottom Dilution
The GL&V CRC, is a newly developed improvement of hydro-cyclones to assure an uninterrupted operationas and a efficient separation of heavy rejects.The CRC system will eliminate plugging problems and recover fibre by adding dilution water in the bottom part of the hydrocyclone anddiluting from the centre of the hydrocyclone andtowards the cone wall.