Flowtec Industriearmaturen banneroverlay

Mit wenigen Klicks
zum gewünschten Produkt!

Unser Armaturenfinder unterstützt Sie bei der Suche nach der richtigen Standardarmatur. Wenige Klicks leiten zielsicher durch unser breites Sortiment zu Ihrem Wunschprodukt.

Gesucht und nicht gefunden? Unser Armaturenangebot geht noch viel weiter. Für spezielle Produkte und individuelle Beratung nehmen Sie direkt Kontakt mit uns auf.

Filter the results

Showing 13–18 of 32 results

    Ball valve

    (ERHARD)
    Pressure: '10 / 16 / 25 / 40
    Nominal size: 80 - 1200
    ERHARD ball valves are characterised by a full port, a low overall height and a low-flow design with ultra-low pressure loss for energy-saving and economical operation. The design principle is a double offset with a free-flowing ball plug. It is designed as a bi-directional valve. The profile ring is in the open position outside the flow. The ERHARD ball valve is also equipped with a robust sealing section with a non-sensitive surface.

    Ball valve for solids

    (Peter Meyer)
    Pressure: 10-40 / ANSI 150/300
    Nominal size: 25-200 / 1" - 8"

    “The Peter Meyer ball valve for solids is produced entirely in Switzerland. The ball valve is available in many different variations.
    The ball valve can be produced as a uni-directional metal seated ball valve either with a full ball or segmented ball. At Peter Meyer, individual customer requirements can also be taken into account at any time, even high quantities are no problem for the modern machinery at Peter Meyer.

    It can be used in a wide range of applications due to its numerous approvals.

    “

    Compact ball valve, soft seated

    Type FA1 / FA2 / FB1 / FB2 / FC1 / FC2 (Adler)
    Pressure: 10 - 160 / 150 - 1500
    Nominal size: 10 - 250

    Due to its compact design, the compact Adler ball valve (Type FA1/FB1/FC1/FA2/FB2/FC2) is a space-saving variant of the flanged way ball valves.

    The valve is made of steel or stainless steel and can be produced as a wafer or flanged ball valve. Depending on the type, the valve is made of cast or solid material.

    The compact Adler ball valve is used in all industries.

    DIN flanged ball valve with heating jacket, long pattern, floating

    Type 553 (JC Valves)
    Pressure: 36bar
    Nominal size: 15 - 100

    “The JC Valves ball valve type 553 is a flanged ball valve with an integrated heating jacket. The heating jacket prevents the hardening or viscous medium damaging the valve at low temperatures.

    The standard version of the flanged ball valve according to DIN with a heating jacket includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    A large selection of materials makes the ball valve 533 very flexible to use.
    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries.
    “

    DIN flanged ball valve, semi trunnion, long/short pattern series

    Type 1516 / 1540 / 1316 / 1340 (JC Valves)
    Pressure: 40bar
    Nominal size: 200 - 300

    “The JC Valves type 1516 / 1540 / 1316 and 1340 are flanged ball valves according to DIN with a trunnion bearing in long or short pattern.

    This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating ball valve and those of the trunnion ball valve and fills the gap between the two.

    It is important to note that the seat in these models is not live loaded and is therefore not innately pressed onto the ball.

    The standard version of the DIN flanged ball valve with a trunnion mounted ball includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    The large variety of materials opens up a wide range of applications for this series.
    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. “

    Data sheet

    Metal seated, DIN flanged ball valve, long pattern, floating

    Type 3563 / 3599 (JC Valves)
    Pressure: 100bar
    Nominal size: 15 - 200

    “The JC Valves metal seated ball valve type 3563 / 3599 is a floating flanged ball valve with a metal seat and long DIN face to face length.

    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. A large selection of materials makes the flanged ball valve flexible to use. “

    Installation guide