Flowtec Industriearmaturen banneroverlay

Mit wenigen Klicks
zum gewünschten Produkt!

Unser Armaturenfinder unterstützt Sie bei der Suche nach der richtigen Standardarmatur. Wenige Klicks leiten zielsicher durch unser breites Sortiment zu Ihrem Wunschprodukt.

Gesucht und nicht gefunden? Unser Armaturenangebot geht noch viel weiter. Für spezielle Produkte und individuelle Beratung nehmen Sie direkt Kontakt mit uns auf.

Filter the results

Showing 7–12 of 25 results

    ANSI double block and bleed ball valve, floating

    (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 1/2" - 4"

    “The JC Valves “double block & bleed” (DBB) valves are designed and produced to provide a reliable alternative to multi-stage shut-off valves.

    They reduce the possible leakage points, lower installation and maintenance costs.
    Combining all the shut-off and drain components within a valve leads to a significant reduction in weight and piping.

    The valves are either available in a flanged or bolted design.”

    ANSI flanged ball valve, semi trunnion

    Type 1515 / 1530 (JC Valves)
    Pressure: 50bar
    Nominal size: 8" - 12"

    “The JC Valves types 1515 and 1530 are flanged ball valves according to ANSI with a semi-trunnion bearing. It is important to note that the seal is not live loaded and is therefore not innately pressed onto the ball.

    This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating and those of the trunnion ball valve and fills the gap between these two.

    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. Another advantage is also the availability of a large selection of materials that makes the ball valve even more flexible. “

    Data sheet

    Ball valve

    Type SKV / SKVT (Somas)
    Pressure: 40
    Nominal size: 25-500

    “Due to the spring-loaded seat construction, Somas ball valves offer good tightness regardless of the differential pressure.

    The Somas ball valves type SKV are full bore valves with nominal diameters from DN25 – DN400 and have a floating ball (floating design) with spring-loaded seats.
    Ball valves with nominal diameters from DN450 – DN500 have a ball (trunnion mounted) which is guided up and down in bushes and is called a valve type SKVT.
    “

    Data sheet
    Installation guide

    Ball valve

    (ERHARD)
    Pressure: '10 / 16 / 25 / 40
    Nominal size: 80 - 1200
    ERHARD ball valves are characterised by a full port, a low overall height and a low-flow design with ultra-low pressure loss for energy-saving and economical operation. The design principle is a double offset with a free-flowing ball plug. It is designed as a bi-directional valve. The profile ring is in the open position outside the flow. The ERHARD ball valve is also equipped with a robust sealing section with a non-sensitive surface.

    Compact ball valve, soft seated

    Type FA1 / FA2 / FB1 / FB2 / FC1 / FC2 (Adler)
    Pressure: 10 - 160 / 150 - 1500
    Nominal size: 10 - 250

    Due to its compact design, the compact Adler ball valve (Type FA1/FB1/FC1/FA2/FB2/FC2) is a space-saving variant of the flanged way ball valves.

    The valve is made of steel or stainless steel and can be produced as a wafer or flanged ball valve. Depending on the type, the valve is made of cast or solid material.

    The compact Adler ball valve is used in all industries.

    DIN flanged ball valve with heating jacket, long pattern, floating

    Type 553 (JC Valves)
    Pressure: 36bar
    Nominal size: 15 - 100

    “The JC Valves ball valve type 553 is a flanged ball valve with an integrated heating jacket. The heating jacket prevents the hardening or viscous medium damaging the valve at low temperatures.

    The standard version of the flanged ball valve according to DIN with a heating jacket includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    A large selection of materials makes the ball valve 533 very flexible to use.
    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries.
    “