Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 19–24 of 38 results
Barstock control valve
The barstock control valve has been specially developed for applications in reverse osmosis plants.
The barstock control valve type RC250 is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT female thread.
Cryogenic and high temperature control valve
The Badger Meter cryogenic control valve has been specially developed for media with t<-50°C.
It controls liquids, gases or steam in general industry, research, development and pilot plants.
The bellows design must be used for the inner valves.
DIN gate valve, small body metal seat
The BFE (Bonney Forge) metal seated, small shut-off gate valve has an outside screwed rising stem, solid wedge and flange connection.
The gate valves are forged and used for non-aggressive liquids, steam and gas.
DIN on/off and control globe valve, forged with gland seal or bellows seal
“The Wakmet metal seated (Type 218 / 218R / 218M / 412 / 422 / 412M / 422M / 530 / 530M / 648M / 649M) globe and regualting valves made of forged steel with a gland or bellows seal, have a one-piece housing and are available with or without a control cone.
The monolithic design allows 100% tightness in both flow directions. The valves are mainly used in the energy sector as well as in various areas in the pulp and paper industry.
 
DIN strainer, forged
Wakmet strainer valves made of forged steel reliably protect pipes and components from contamination and damage.
Wakmet strainer valves can be supplied with a drain plug on request.
Depending on the model, the temperature ranges extend up to 530°C (up to ≤ 200°C for PTFE).
The Wakmet metal seated DIN strainer valves (Type 822/ 823/ 912/ 922/ 932) are mainly used in the energy sector as well as in the pulp and paper industry.
Depending on the type, they are suitable for media such as water, steam, acids, alkalis, non-aggressive and non-toxic media as well as some also for gas, fuel and sea water.
DIN swing check valve, forged
Wakmet check valves prevent the backflow of medium into the pipe.
The forged welded design prevents material defects such as cracks or porosity and excludes non-metallic impurities.
A completely open disc provides a full bore so the flow rate remains unaffected. A version with a bypass valve is available on request.
The metal seated DIN check valves KZS/KZK are mainly used in the energy sector for energy applications as well as in the pulp and paper industry.