Flowtec Industriearmaturen banneroverlay

Just a few clicks
to your desired product.

Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.

Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.

Filter the results

Showing 37–42 of 93 results

    ANSI piston check valves

    Type R800 (JC Valves)
    Pressure: 138bar
    Nominal size: 1/2" - 2"

    “The JC Valves piston check valve R800 is designed with either bolted (NPT) or welded (SW) ends.

    The piston check valve is mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”

    ANSI Schmutzfänger ( Guss- oder Schmiedekonstruktion)

    (Flowtec)
    Pressure: ANSI 150 - 2500
    Nominal size: 1/2" - 24"

    The Flowtec ANSI strainer valves are used to filter out solids from the medium. They are available in different mesh sizes. Special designs are also possible.

    ANSI swing check valve

    Type VR150BB / VR300BB / VR600BB / VR900BB / VR1500BB / VR2500BB / VR900PS / VR1500PS / VR2500PS (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 2" - 36"

    “The JC Valves check valve is designed with either a bolted or pressure seal bonnet. Both variants are designed in such a way that the disc and seat can be replaced. The valve is designed according to ANSI.

    These housing check valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”

    Ball valve

    (ERHARD)
    Pressure: '10 / 16 / 25 / 40
    Nominal size: 80 - 1200
    ERHARD ball valves are characterised by a full port, a low overall height and a low-flow design with ultra-low pressure loss for energy-saving and economical operation. The design principle is a double offset with a free-flowing ball plug. It is designed as a bi-directional valve. The profile ring is in the open position outside the flow. The ERHARD ball valve is also equipped with a robust sealing section with a non-sensitive surface.

    Barstock control valve

    Type RC250 (Badger Meter)
    Pressure: max.345 bar
    Nominal size: 1/4", 1/2", 3/4", 1"

    The barstock control valve has been specially developed for applications in reverse osmosis plants.

    The barstock control valve type RC250 is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.

    Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.

    It is designed as standard with an NPT female thread.

    Butterfly valve Hydromat®

    Type Hydromat® (Tröger + Entenmann)
    Pressure: '10 / 16
    Nominal size: 150 - 1400

    Der HYDROMAT® ist eine extrem robuste Absperrklappe mit zentrisch gelagerter Klappenscheibe, die durch bewährte konstruktive Merkmale eine jahrzehntelange Betriebssicherheit gewährleistet und somit Kosten spart, da keine unnötigen Reparaturen anfallen.