Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 79–84 of 107 results
Pinch valve RF VALVE
“The pinch valve RF is designed for abrasive, corrosive and scaling sludge, solids, liquids and powders.
It is characterised by a full bore and it is interchangeable with most ball valves and diaphragm valves.
The MONSYS monitoring system prevents unexpected emergency repairs.
Technical advantages:
* Patented expansion folds prevent stretching, thus reducing the stress on the tube and significantly increasing the service life.
* No moving parts so the tube is the only wear part.
* Trouble-free operation: no blocking or clogging.
* Increased service life of the tube, which does not stretch when closed.
* Cost-effective solutions as no actuator is required.
Available in nominal diameters from DN25 – DN 1500
The tube can be replaced without having to remove the valve from the line, thus resulting in low maintenance and operating costs.
Actuator types: pneumatic, electric and hydraulic”
* Kostengünstige Lösung, da kein Antrieb benötigt wird.
Erhältlich in den Nennweiten DN25 – DN 1500
Der Schlauch kann gewechselt werden, ohne daß die Armatur aus der Leitung herausgenommen werden muss, was in niedrigen Wartungs- und Betriebskosten resultiert.
Antriebsarten: pneumatisch, elektrisch und hydraulisch”
Piston check and piston closing check valve, forged, metal seated
Wakmet piston check valves made of forged steel prevent the backflow of medium into the pipe. The check valve can also be used as a shut-off valve to open and stop the flow.
Depending on the model, the temperature ranges extend up to 530°C or 670°C (up to ≤ 200°C for PTFE).
Wakmet metal seated piston check valves are mainly used in the energy sector as well as in the pulp and paper industry. Depending on the type, they are suitable for media such as water, steam, non-aggressive and non-toxic media as well as some also for gas, fuel and sea water.
Plastic ball valve
The plastic CEPEX ball valves can be used both to shut off and control liquids.
The ball valves made entirely of plastic bring advantages in terms of resistance to chemicals. The EXTREME series is designed for special requirements and can therefore be used in steel plants, chemical plants or the oil industry.
The plastic ball valves can be operated either manually or also automatically. The model is available in a wide variety of plastics (PVC-U, CPVC, PP-H, PVDF and ABS).
Plastic butterfly valve
The CEPEX plastic butterfly valves can be used to shut off and control liquids.
The valves made entirely of plastic have the advantage that they are resistant to chemicals. The EXTREME series is designed for special requirements and can therefore be used in steel plants, chemical plants or the oil industry.
The plastic butterfly valve can be operated either manually or also automatically and is available in a wide variety of plastics (PVC-U, CPVC, PP-H, PVDF and ABS).
Plastic diaphragm valve
The plastic CEPEX diaphragm valves can be used both to shut off and control liquids.
The ball valves made entirely of plastic bring advantages in terms of resistance to chemicals. The EXTREME series is designed for special requirements and can therefore be used in steel plants, chemical plants or the oil industry.
The plastic diaphragm valves can be operated either manually or also automatically. The model is available in a wide variety of plastics (PVC-U, CPVC, PP-H, PVDF and ABS).
PTFE lined butterfly valve with Duroplast body
The CST-K from ChemValve-Schmid is a PTFE lined butterfly valve with a plastic housing. The housing made of Duraplast thermosetting plastic reduces the weight of the valve and therefore provides savings on the pipe construction. Plastic is also more resistant to corrosion than standard housing materials such as cast iron and cast steel.
The PTFE lined butterfly valve with a Duroplast housing is produced to the highest quality standards for the safe handling of aggressive media. Spherical structural elements reduce friction and therefore increase the service life. The PTFE lined butterfly valve is designed for use with highly chemical media and is therefore used in almost all industries.