Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 49–54 of 107 results
CeraValve ceramic lined sliding disc valve
Cera Valve offers wear and corrosion-resistant sliding disc valves for on/off and control functions.
The medium flows exclusively in ceramic with this design. It is therefore suitable for highly corrosive media.
Other advantages: very good control of small amounts of media containing solids and completely cavity free.
A large selection of ceramic materials allows for solutions for almost all industrial sectors.
Special adaptations and special applications are also solved in close cooperation with our customers.
The ceramic lined sliding disc valve is used in waste incineration plants:
– Dosing of HCI washing water (pre-washer)
– Dosing of limewash to the absorber (pH regulation, desulfurisation)
and in the chemical industry as an – Alternative to PTFE / PFA lined valves if a medium is abrasive and / or prone to diffusion.
– Alternative to valves made of special materials. (e.g. Hastelloy, titanium, etc.)
CeraValve partially ceramic lined ball valve
The ball valve BR 26 CERA is a stainless steel ball valve for on/off functions only with ceramic seats and a ceramic ball for use in less abrasive and low corrosive applications.
The basic principle is based on the “floating ball” design. The seats are pressed against the ball by O-rings. This valve can be supplied with a manual handle with a pneumatic or electric actuator.
Channel penstock
“The Orbinox channel gate type CC is designed with a 3-sided sealing and for use in waste water technology, irrigation, hydropower utilisation and similar areas of application.
The channel gate is a welded design in stainless steel (1.4301 / 1.4571) with a bolted-on elastomer seal.
The model offers many design options for different dimensions and operating pressures.
Actuator types: Manual operation, electric actuator, hydraulic actuator.”
Compact ball valve, soft seated
Due to its compact design, the compact Adler ball valve (Type FA1/FB1/FC1/FA2/FB2/FC2) is a space-saving variant of the flanged way ball valves.
The valve is made of steel or stainless steel and can be produced as a wafer or flanged ball valve. Depending on the type, the valve is made of cast or solid material.
The compact Adler ball valve is used in all industries.
Diaphragm valve
DIN flanged ball valve with heating jacket, long pattern, floating
“The JC Valves ball valve type 553 is a flanged ball valve with an integrated heating jacket. The heating jacket prevents the hardening or viscous medium damaging the valve at low temperatures.
The standard version of the flanged ball valve according to DIN with a heating jacket includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
A large selection of materials makes the ball valve 533 very flexible to use.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries.
“