Additional information
| Marken | Orbinox |
|---|---|
| Funktion | On-off valves |
| Industrie | Water, waste water |
| Anwendung | Water & waste water |
| Nenndruck | Special pressure |
| Betriebstemperatur | Standard temperature |
Rectangular swing flap gate penstock
Related products
Metal seated butterfly valve
Type MTV / MTVF / MTVL (Somas)
Pressure: 25
Nominal size: 80-500
Somas shut-off valves type MTV, MTVF and MTVL are on/off valves and control valves.
These valves are designed to control many different liquids, gases and steam over a wide temperature range.
They are all triple eccentric valves and due to the unique design of the valve disc, a solid stainless steel seat can be used. This solid seat is resistant to high flow velocities and temperatures. This allows us to achieve high functional reliability even in difficult applications.
The MTV valve can be supplied as a wafer type or lug type valve.
The valve type MTVF is a double flanged valve. They are normally supplied with a metal seat.
Double eccentric butterfly valve
Type EAK (ERHARD)
Pressure: '6 / 10 / 16 / 25 / 40
Nominal size: 700 - 3600
The double eccentric butterfly valve EAK is used in water applications with large nominal diameters.
The butterfly valve offers a modular actuator concept through the use of a handwheel, electric actuator, stem extension, weight-loaded hydraulic actuator, pneumatic actuator or chainwheel.
Double eccentric , double flanged butterfly valve
(TTV)
Metal seated butterfly valve for exhaust gas applications
Type VSS HAT / MTV HT (Somas)
Pressure: 25
Nominal size: 80-1200
“Somas has developed a range of metal seated butterfly / shut-off and control valves for exhaust gas applications that meet the requirements of EN 12516-2 and ASME B16.34.
Typical applications for these valves in diesel engines, gas engines and exhaust gas systems are:
waste gates, EGR, turbo shutdown, slow steaming, air bypass, gas scrubbers, heat recovery
Somas exhaust gas valves have many technical advantages.
The geometry of the disc is designed in such a way that it only comes into contact with the seal when it is fully closed. This ensures that the wear on the sealing surface is kept to a minimum and a long service life is guaranteed.
The valves have a solid seat design and are therefore resistant to clogging.
The shaft bearings are designed as standard in metal-to-metal pairs, which means that the valves can be used without any problems in high temperature applications.
All valves are supplied as standard with a graphite gland. Other materials are available.
Somas VSS / HT and MTV / HT valves are bi-directional and can therefore be installed in both directions.”