Additional information
| Marken | Orbinox |
|---|---|
| Funktion | On-off valves |
| Industrie | Pulp & paper, Sugar, starch |
| Anwendung | Pulp & paper applications |
| Nenndruck | ANSI, 150, PN, 10 |
| Betriebstemperatur | Standard temperature |
Sampling valve
Related products
Standard angle control valve
Type RC220 (Badger Meter)
Pressure: max.340 bar
Nominal size: 1/4", 1/2", 3/4", 1"
The standard angle control valve RC220 is used for the control of liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is suitable for medium to small flow rates and is reliable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT female thread.
High pressure control valve
Type HP-10 (10000psi) (Badger Meter)
Pressure: max. 689 bar
Nominal size: 1/4", 1/2"
The high-pressure control valve type HP-10 is used wherever the standard type RC200 comes to its limits due to too high pressure.
The high-pressure control valve type HP-10 is the right valve for liquids and gases in high-pressure applications with medium to small flow rates and is available as a globe or angle valve.
3-way control valve
Type RC230 (USA: Typ 564 / 1118) (Badger Meter)
Pressure: max. 100 bar
Nominal size: 1/4", 1/2", 3/4", 1"
The Badger Meter 3-way control valve RC230 stands for very precise control.
It is particularly suitable for the control of liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, this 3-way control valve is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates. The valve is designed as standard with an NPT female thread.
DIN on/off and control globe valve, “stellite” version
(LDM Valves)
Pressure: PN16-PN40
Nominal size: DN15-400
"Shut-off control valve with a Stellite seat and a pressure balanced cone (from DN200) as well as linear flow characteristics.
Available with a gland seal or bellows seal.
For nominal diameters from DN15 - DN400
Can be used in temperature ranges of -60°C to +550°C depending on the choice of material."