Additional information
| Marken | Orbinox |
|---|---|
| Funktion | On-off valves |
| Industrie | Pulp & paper, Sugar, starch |
| Anwendung | Pulp & paper applications |
| Nenndruck | ANSI, 150, PN, 10 |
| Betriebstemperatur | Standard temperature |
Sampling valve
Related products
Standard angle control valve
Type RC220 (Badger Meter)
Pressure: max.340 bar
Nominal size: 1/4", 1/2", 3/4", 1"
The standard angle control valve RC220 is used for the control of liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is suitable for medium to small flow rates and is reliable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT female thread.
Flanged globe style control valve
Type RC210 (USA: Typ 860 / 1499) (Badger Meter)
Pressure: max. 320 bar
Nominal size: 1/2", 3/4", 1"
The Badger Meter flanged flow control valve is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
Control valve
Type RV (ERHARD)
Pressure: '16 / 25 / 40
Nominal size: 50 - 150
ERHARD control valves type RV are designed for throttling and regulation in water treatment and water distribution plants as well as in hydropower plants. The slotted bush also provides optimum flow behaviour for harmless energy conversion.
The control valve is ideally suited for continuous operation during cavitation.
The ERHARD control valve is available with a handwheel, electric actuator, hydraulic or pneumatic piston actuator. A straight or angle version is possible.
Standard control valve
Type RC200 (USA: Typ 807 / 752) (Badger Meter)
Pressure: max.345 bar
Nominal size: 1/4", 1/2", 3/4", 1"
The standard Badger Meter control valve RC 200 is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT or a BSP-P female thread.