Additional information
| Marken | Burocco |
|---|---|
| Funktion | Control valves |
| Industrie | Energy, Plant engineering & construction |
| Anwendung | Steam and energy |
| Nenndruck | PN, 16, 40 |
Globe valves in 2- and 3-way design
Related products
Control valve
Type RV (ERHARD)
Pressure: '16 / 25 / 40
Nominal size: 50 - 150
ERHARD control valves type RV are designed for throttling and regulation in water treatment and water distribution plants as well as in hydropower plants. The slotted bush also provides optimum flow behaviour for harmless energy conversion.
The control valve is ideally suited for continuous operation during cavitation.
The ERHARD control valve is available with a handwheel, electric actuator, hydraulic or pneumatic piston actuator. A straight or angle version is possible.
Standard control valve
Type RC200 (USA: Typ 807 / 752) (Badger Meter)
Pressure: max.345 bar
Nominal size: 1/4", 1/2", 3/4", 1"
The standard Badger Meter control valve RC 200 is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT or a BSP-P female thread.
DIN on/off and control globe valve, “stellite” version
(LDM Valves)
Pressure: PN16-PN40
Nominal size: DN15-400
"Shut-off control valve with a Stellite seat and a pressure balanced cone (from DN200) as well as linear flow characteristics.
Available with a gland seal or bellows seal.
For nominal diameters from DN15 - DN400
Can be used in temperature ranges of -60°C to +550°C depending on the choice of material."
Sampling valve
Type TP (Orbinox)
Pressure: 10
Nominal size: 25-40
“The simple sampling valve from Orbinox is designed for taking media samples with a solid content of 0-8% from pipes and tanks.
The shaft with the closing element of the sampling valve opens into the pipe, avoiding the build-up of the medium through the special sealing seat.
Purge connections and pneumatic actuators are available as an option.”