Additional information
| Marken | Orbinox |
|---|---|
| Funktion | On-off valves |
| Industrie | Water, waste water |
| Anwendung | Water & waste water |
| Nenndruck | Special pressure |
| Betriebstemperatur | Standard temperature |
Rectangular swing flap gate penstock
Related products
Butterfly valve damper
Type RD / RA (Herberholz)
Pressure: max. 2bar
Nominal size: DN50 -DN400
The throttle valves RD and RA are designed as a wafer type valve with a centric valve disc and are suitable for operating temperatures up to 800°C, depending on the choice of material.
For flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47. Lengths according to the company standard.
Connecting flange for actuators to DIN EN ISO 5211.
Testing according to DIN EN 12266.
Versions:
RD without seat (leakage approx. 1% of surface equivalent),
RA with metal travel stop ring (leakage approx. 0.5% of surface equivalent),
RA with seal ring (leakage approx. 0.3% of surface equivalent),
RA with metal travel stop ring with seal ring (leakage approx. 0.1% of surface equivalent)
Metal seated butterfly valve for oil & gas applications
Type Typ MTV / MTVG / MTVL (Somas)
Pressure: 25
Nominal size: 80-500
“Somas valves type MTV, MTVG and MTVL are on/off valves and control valves that have been specially developed for oil and gas applications and are designed to control over a wide temperature range.
They are normally supplied with a metal seat.
They are all triple eccentric valves and due to the unique design of the valve disc, a solid stainless steel seat can be used. This solid seat is resistant to high flow velocities and temperatures. This allows us to achieve high functional reliability even in difficult applications.
The MTV valve can be supplied as a wafer type or lug type valve.
The valve type MTVG is a wafer valve with 4 guide bores.”
Swing disc valve
Type SD (Orbinox)
Pressure: 3
Nominal size: 100 - 300
“The swing disc valve type SD from Orbinox consists of a cast housing, a metal seat and a metal disc.
Full bore when open.
The swing disc valve is suitable for high switching cycles in difficult applications, such as dirt sluice applications, bulk materials, etc.
Technical features include the short installation length (lightweight design) and the protected pivot arm to avoid deposits.”
PTFE lined butterfly valve with Duroplast body
Type CST-K (ChemValve-Schmid)
Pressure: 10
Nominal size: 50 - 300
The CST-K from ChemValve-Schmid is a PTFE lined butterfly valve with a plastic housing. The housing made of Duraplast thermosetting plastic reduces the weight of the valve and therefore provides savings on the pipe construction. Plastic is also more resistant to corrosion than standard housing materials such as cast iron and cast steel.
The PTFE lined butterfly valve with a Duroplast housing is produced to the highest quality standards for the safe handling of aggressive media. Spherical structural elements reduce friction and therefore increase the service life. The PTFE lined butterfly valve is designed for use with highly chemical media and is therefore used in almost all industries.