Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 67–72 of 74 results
Soft seated 3-piece ball valve
“The JC Valves 800 series is a solid 3-piece ball valve that can also be used for high pressures up to 140 bar. Due to its modular design, the ball valve can be used in many different ways and can be supplied with various connections, both bolted and welded ends. Another advantage is also the availability of a large selection of materials that makes the ball valve even more flexible.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. “
Soft seated 3-piece flanged ball valve, ANSI, floating
“The JC Valves type 915N is a flanged 3-way ball valve for ANSI piping.
The ball is fully bored and can be designed with an “L” or “T” bore. The valve is made of steel or stainless steel.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries.”
Soft seated 3-piece flanged ball valve, floating
“The JC Valves ball valve type 916N is a flanged 3-way ball valve for DIN piping and is made of steel or stainless steel.
The ball is fully bored and can be designed with an “L” or “T” bore.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), the soft seated floating 3-way flanged ball valve can be used in virtually all industries. “
Soft seated, butterfly valve
“The Emreson resilient seated butterfly valve is a centric butterfly valve with a split shaft (up to DN300), rounded polished disc edge, centring bores on the valve housing and an extended valve neck allows for pipe insulation.
The type GRW is designed as a wafer type valve and the GRL as a flanged type valve according to EN558 series 20, with a spheroidal cast iron housing and a disc in 1.4408 steel. “
Standard angle control valve
The standard angle control valve RC220 is used for the control of liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is suitable for medium to small flow rates and is reliable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT female thread.
Standard control valve
The standard Badger Meter control valve RC 200 is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT or a BSP-P female thread.