Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 25–30 of 74 results
3-way control valve
The Badger Meter 3-way control valve RC230 stands for very precise control.
It is particularly suitable for the control of liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, this 3-way control valve is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates. The valve is designed as standard with an NPT female thread.
ANSI Schmutzfänger ( Guss- oder Schmiedekonstruktion)
The Flowtec ANSI strainer valves are used to filter out solids from the medium. They are available in different mesh sizes. Special designs are also possible.
Ball segment valve PN100-Series
“The ball segment and shaft of the Somas ball segment valve series PN100 consist of one piece. The seat is pressed against the ball segment by a spring element. This enables very good sealing, even at low differential pressures.
The valve housing of the Somas wafer type ball segment valve consists of one piece with nominal diameters DN25/5 up to DN 50 and is divided diagonally with nominal diameters DN 80 up to DN 150.”
Ball segment valve PN40-Series
“The unique system of a shaft with a clamping coupling was developed by Somas for backlash-free torque transmission and enables extremely precise control behaviour.
The seat, which is available in three different materials (PTFE, PTFE 53 and HiCo), is pressed against the ball segment by spring elements.
The Somas ball segment valves type KVTF with a centrically mounted shaft and the KVXF with an eccentrically mounted shaft are produced in a flanged design.
The valve housing consists of one piece and has a full bore. “
Ball segment valve, flanged design, short face-to-face dimension
“The Somas valve KVTF-C is a ball segment valve in a flanged design with a centrically mounted shaft in a short length.
The KVXF-C version is the flanged design with an eccentrically mounted shaft. The valve body is produced in one piece and has a reduced bore for excellent control.”
Ball valve
“Due to the spring-loaded seat construction, Somas ball valves offer good tightness regardless of the differential pressure.
The Somas ball valves type SKV are full bore valves with nominal diameters from DN25 – DN400 and have a floating ball (floating design) with spring-loaded seats.
Ball valves with nominal diameters from DN450 – DN500 have a ball (trunnion mounted) which is guided up and down in bushes and is called a valve type SKVT.
“