Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 43–48 of 74 results
DIN strainer, forged
Wakmet strainer valves made of forged steel reliably protect pipes and components from contamination and damage.
Wakmet strainer valves can be supplied with a drain plug on request.
Depending on the model, the temperature ranges extend up to 530°C (up to ≤ 200°C for PTFE).
The Wakmet metal seated DIN strainer valves (Type 822/ 823/ 912/ 922/ 932) are mainly used in the energy sector as well as in the pulp and paper industry.
Depending on the type, they are suitable for media such as water, steam, acids, alkalis, non-aggressive and non-toxic media as well as some also for gas, fuel and sea water.
DIN swing check valve, forged
Wakmet check valves prevent the backflow of medium into the pipe.
The forged welded design prevents material defects such as cracks or porosity and excludes non-metallic impurities.
A completely open disc provides a full bore so the flow rate remains unaffected. A version with a bypass valve is available on request.
The metal seated DIN check valves KZS/KZK are mainly used in the energy sector for energy applications as well as in the pulp and paper industry.
Double eccentric , double flanged butterfly valve
Flächengewichtsventil
The Somas ball segment valves type KVTW / KVTF are basis weight valves with a special seat for low torque requirements and offered in combination with a step motor as an accurate control valve. The control valve unit consists of a balanced valve with a drive and control element.
The Somas basis weight valve is used in the paper industry.
Flanged globe style control valve
The Badger Meter flanged flow control valve is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
High pressure control valve
The high-pressure control valve type HP-10 is used wherever the standard type RC200 comes to its limits due to too high pressure.
The high-pressure control valve type HP-10 is the right valve for liquids and gases in high-pressure applications with medium to small flow rates and is available as a globe or angle valve.