Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 25–30 of 48 results
ANSI Schmutzfänger ( Guss- oder Schmiedekonstruktion)
The Flowtec ANSI strainer valves are used to filter out solids from the medium. They are available in different mesh sizes. Special designs are also possible.
ANSI swing check valve
“The JC Valves check valve is designed with either a bolted or pressure seal bonnet. Both variants are designed in such a way that the disc and seat can be replaced. The valve is designed according to ANSI.
These housing check valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”
Ball valve for solids
“The Peter Meyer ball valve for solids is produced entirely in Switzerland. The ball valve is available in many different variations.
The ball valve can be produced as a uni-directional metal seated ball valve either with a full ball or segmented ball. At Peter Meyer, individual customer requirements can also be taken into account at any time, even high quantities are no problem for the modern machinery at Peter Meyer.
It can be used in a wide range of applications due to its numerous approvals.
“
Butterfly valve, low temperatur
“The Somas butterfly valve type VSS LT is designed for a wide range of liquids, gases and steam for temperatures down to -196°C (-320°F).
The valve can be designed as a control, on/off or manual valve.
The VSS LT valve can be supplied in a wafer and lugged design.
The valve has a triple eccentric valve design. The unique shape of the disc enables the use of a solid stainless steel seat. The solid seat remains unaffected by high flow velocities and provides good valve function, even in the most difficult applications.”
Cryogenic and high temperature control valve
The Badger Meter cryogenic control valve has been specially developed for media with t<-50°C.
It controls liquids, gases or steam in general industry, research, development and pilot plants.
The bellows design must be used for the inner valves.
DIN flanged ball valve, semi trunnion, long/short pattern series
“The JC Valves type 1516 / 1540 / 1316 and 1340 are flanged ball valves according to DIN with a trunnion bearing in long or short pattern.
This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating ball valve and those of the trunnion ball valve and fills the gap between the two.
It is important to note that the seat in these models is not live loaded and is therefore not innately pressed onto the ball.
The standard version of the DIN flanged ball valve with a trunnion mounted ball includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
The large variety of materials opens up a wide range of applications for this series.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. “