Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 31–36 of 38 results
Piston check and piston closing check valve, forged, metal seated
Wakmet piston check valves made of forged steel prevent the backflow of medium into the pipe. The check valve can also be used as a shut-off valve to open and stop the flow.
Depending on the model, the temperature ranges extend up to 530°C or 670°C (up to ≤ 200°C for PTFE).
Wakmet metal seated piston check valves are mainly used in the energy sector as well as in the pulp and paper industry. Depending on the type, they are suitable for media such as water, steam, non-aggressive and non-toxic media as well as some also for gas, fuel and sea water.
Soft seated 3-piece ball valve
“The JC Valves 800 series is a solid 3-piece ball valve that can also be used for high pressures up to 140 bar. Due to its modular design, the ball valve can be used in many different ways and can be supplied with various connections, both bolted and welded ends. Another advantage is also the availability of a large selection of materials that makes the ball valve even more flexible.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. “
Soft seated, DIN flanged ball valve, long pattern, floating
“The JC Valves soft seated flanged ball valve type 563 / 599 is a floating ball valve according to DIN with a long DIN face to face length.
The standard version of the soft seated, floating DIN flanged ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. A large selection of materials makes the flanged ball valve flexible to use. “
Soft seated, forged monobloc ball valve
“The JC Valves type 400 and 41500 is a forged monoblock ball valve that can also be used for high pressures up to 240 bar.
The standard version of the soft seated monoblock ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
The valve can be designed with both bolted and welded ends.
Thanks to a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), this monoblock ball valve can be used in virtually all industries. A large selection of materials opens up a wide range of applications. “
Standard angle control valve
The standard angle control valve RC220 is used for the control of liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is suitable for medium to small flow rates and is reliable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT female thread.
Standard control valve
The standard Badger Meter control valve RC 200 is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT or a BSP-P female thread.