Flowtec Industriearmaturen banneroverlay

Just a few clicks
to your desired product.

Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.

Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.

Filter the results

Showing 19–24 of 67 results

    3-way ball valve, soft seated, compact design

    Type Typ FT4 / FT6 / FZ4 / FZ6 (Adler)
    Pressure: '10 - 64 / 150 - 600
    Nominal size: 8 - 150

    Due to its compact design, the Adler 3-way ball valve is a space-saving variant of the flanged 3-way ball valves.

    The ball is fully bored and can be designed with an “L” or “T” bore. The valve is made of steel or stainless steel and can be produced as a wafer design ball valve or with female thread.

    Air valve

    Type TWIN Air (ERHARD)
    Pressure: '10 / 16 / 25 / 40
    Nominal size: 50 - 200
    The TWIN AIR air valve from Erhard regulates the automatic venting of water pipes in plants, buildings and shafts and guarantees automatic venting of the pipe during filling, operational venting and emptying processes. It is characterised by a compact design and low weight as well as a large cross-section, which enables ultra-high venting speeds. The operating principle: Valve for automatic air release and air admission via a lever and with patented self-cleaning at each switching operation. The valve is enamelled on the inside and has an epoxy coating on the outside. It is also available for seawater applications.

    ANSI cast trunnion design, flanged ball valve, soft/metal seated

    Type 2515 / 2530 (JC Valves)
    Pressure: 50bar
    Nominal size: 2" - 16"

    “The JC Valves ball valve type 2515 and 2530 are flanged cast trunnion ball valves according to ANSI Class 150 or 300 respectively. They can be designed as both soft and metal seated valves. A large selection of materials makes the ball valve even more flexible.

    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. “

    Data sheet
    Installation guide

    ANSI double block and bleed ball valve, floating

    (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 1/2" - 4"

    “The JC Valves “double block & bleed” (DBB) valves are designed and produced to provide a reliable alternative to multi-stage shut-off valves.

    They reduce the possible leakage points, lower installation and maintenance costs.
    Combining all the shut-off and drain components within a valve leads to a significant reduction in weight and piping.

    The valves are either available in a flanged or bolted design.”

    ANSI flanged ball valve, semi trunnion

    Type 1515 / 1530 (JC Valves)
    Pressure: 50bar
    Nominal size: 8" - 12"

    “The JC Valves types 1515 and 1530 are flanged ball valves according to ANSI with a semi-trunnion bearing. It is important to note that the seal is not live loaded and is therefore not innately pressed onto the ball.

    This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating and those of the trunnion ball valve and fills the gap between these two.

    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. Another advantage is also the availability of a large selection of materials that makes the ball valve even more flexible. “

    Data sheet

    ANSI gate valve

    Type VC150BB / VC300BB / VC600BB / VC900BB / VC1500BB / VC2500BB / VC900PS / VC1500PS / VC2500PS (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 2" - 36"

    “The JC Valves gate valves are designed with either a bolted or pressure seal bonnetand a flexible wedge. The valve can be produced with nominal diameters greater than 2 1/2”.

    The valve is designed with an outside screwed stem and according to ANSI.

    This gate valve is mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”