Flowtec Industriearmaturen banneroverlay

Just a few clicks
to your desired product.

Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.

Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.

Filter the results

Showing 25–30 of 67 results

    ANSI gate valve, forged design

    Type VC150BB / VC300BB / VC600BB / VC900BB / VC1500BB / VC2500BB / VC900PS / VC1500PS / VC2500PS (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 2" - 36"

    “The JC Valves gate valves are designed with either a bolted or pressure seal bonnet and a flexible wedge. The valve can be produced with nominal diameters greater than 2 1/2”. The valve is designed with an outside screwed stem and according to ANSI.

    The JC Valves ANSI gate valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”

    ANSI metal seated flanged ball valve, floating

    Type 3515 / 3530 (JC Valves)
    Pressure: 50bar
    Nominal size: 1/2" - 8"

    “The JC Valves ball valve type 3515 / 3530 is a floating ball valve according to ANSI with a metal seat. It is a flanged ball valve for ANSI piping.

    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. Another advantage is the large selection of materials that makes the ball valve even more flexible. “

    Data sheet
    Installation guide

    ANSI on/off and control valve (gland seal / bellows seal)

    Type VG150BB / VG300BB / VG600BB / VG900BB / VG1500BB / VG2500BB / VG900PS / VG1500PS / VG2500PS (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 2" - 16"

    “JC Valves shut-off and control globe valves with a gland packing seal are made with either a bolted or pressure seal bonnet. Both variants are designed in such a way that the disc and seat can be replaced.
    The valve has an outside screwed stem in according to ANSI.

    The shut-off and control globe valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”

    ANSI piston check valves

    Type R800 (JC Valves)
    Pressure: 138bar
    Nominal size: 1/2" - 2"

    “The JC Valves piston check valve R800 is designed with either bolted (NPT) or welded (SW) ends.

    The piston check valve is mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”

    ANSI swing check valve

    Type VR150BB / VR300BB / VR600BB / VR900BB / VR1500BB / VR2500BB / VR900PS / VR1500PS / VR2500PS (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 2" - 36"

    “The JC Valves check valve is designed with either a bolted or pressure seal bonnet. Both variants are designed in such a way that the disc and seat can be replaced. The valve is designed according to ANSI.

    These housing check valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”

    Ball valve

    (ERHARD)
    Pressure: '10 / 16 / 25 / 40
    Nominal size: 80 - 1200
    ERHARD ball valves are characterised by a full port, a low overall height and a low-flow design with ultra-low pressure loss for energy-saving and economical operation. The design principle is a double offset with a free-flowing ball plug. It is designed as a bi-directional valve. The profile ring is in the open position outside the flow. The ERHARD ball valve is also equipped with a robust sealing section with a non-sensitive surface.