Flowtec Industriearmaturen banneroverlay

Just a few clicks
to your desired product.

Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.

Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.

Filter the results

Showing 31–36 of 67 results

    Butterfly valve Hydromat®

    Type Hydromat® (Tröger + Entenmann)
    Pressure: '10 / 16
    Nominal size: 150 - 1400

    Der HYDROMAT® ist eine extrem robuste Absperrklappe mit zentrisch gelagerter Klappenscheibe, die durch bewährte konstruktive Merkmale eine jahrzehntelange Betriebssicherheit gewährleistet und somit Kosten spart, da keine unnötigen Reparaturen anfallen.

    Centric flanged / double flanged butterfly valve

    (TTV)
    Data sheet
    Installation guide

    Check valve

    Type ERK (ERHARD)
    Pressure: '10 / 16 / 25 / 40
    Nominal size: 150 - 1400
    ERHARD check valves are tried and tested double offset valves in a short weight-saving length. The freely oscillating valve disc has a flow-friendly design. The shaft bearings are designed to be maintenance-free and self-lubricating. Further advantages include the rolled up, solid housing seat ring and the disc seat ring with an elastic fine seal. These check valves are also available with a hydraulic damping device.

    Compact ball valve, soft seated

    Type FA1 / FA2 / FB1 / FB2 / FC1 / FC2 (Adler)
    Pressure: 10 - 160 / 150 - 1500
    Nominal size: 10 - 250

    Due to its compact design, the compact Adler ball valve (Type FA1/FB1/FC1/FA2/FB2/FC2) is a space-saving variant of the flanged way ball valves.

    The valve is made of steel or stainless steel and can be produced as a wafer or flanged ball valve. Depending on the type, the valve is made of cast or solid material.

    The compact Adler ball valve is used in all industries.

    Diaphragm valve

    Type FD (ERHARD)
    Pressure: '10
    Nominal size: 15 - 200
    ERHARD diaphragm valves are designed for on-off, controlling and monitoring and are therefore industrial valves suitable for individual applications. The type FD has a full port. It is characterised by tight closing even with particles in the media. The hood and pressure piece do not come into contact with the medium. These diaphragm valves are also equipped with lift restriction as standard. The diaphragm valves are available with numerous actuator types for manual and automatic operation. These valves are designed for universal use due to the combinations of housing and diaphragm materials individually adapted to the medium.

    DIN flanged ball valve, semi trunnion, long/short pattern series

    Type 1516 / 1540 / 1316 / 1340 (JC Valves)
    Pressure: 40bar
    Nominal size: 200 - 300

    “The JC Valves type 1516 / 1540 / 1316 and 1340 are flanged ball valves according to DIN with a trunnion bearing in long or short pattern.

    This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating ball valve and those of the trunnion ball valve and fills the gap between the two.

    It is important to note that the seat in these models is not live loaded and is therefore not innately pressed onto the ball.

    The standard version of the DIN flanged ball valve with a trunnion mounted ball includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    The large variety of materials opens up a wide range of applications for this series.
    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. “

    Data sheet