Flowtec Industriearmaturen banneroverlay

Just a few clicks
to your desired product.

Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.

Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.

Filter the results

Showing 43–48 of 67 results

    Electric multi-turn and part-turn actuators

    Type SA / SAR / SQn / ... (AUMA)

    In order to ensure that liquids, gases, steam and granulate flow through pipes in process engineering plants and that their flow rates on the transport routes are also optimally controlled, positioners position the valves between the open and closed state. The valves are operated remotely from the control room with AUMA actuators.

    AUMA covers a torque range from 10 Nm to 32,000 Nm with the product range of the SA type rotary actuators and a torque range of 50 Nm to 2,400 Nm with the product range of SQ type part-turn actuators.

    AUMA electric rotary actuators are used for the automation of butterfly valves or gate valves, for example. They are the most flexible products in the AUMA family. AUMA electric part-turn actuators are used wherever a swivel movement of < 360 degrees has to be realised, as with butterfly valves and ball valves.

    Electric part-turn actuator

    (J+J)
    "The J4C series is one of the leading electric part-turn actuators and offers many possibilities with its fully digital electronics. The actuator can be configurated precisely to your needs. The integrated RBG status LED always shows the actual operating state by means of different colours and flashing cycles. In addition to brushless motors, the robust plastic housing, moreover J+J actuators are very user-friendly. All model sizes from 20 Nm to 300 Nm are designed for input voltages range from 24 V to 240 V AC/DC. They are also optionally available for an input voltage of 12 V AC/DC."

    Fixed cone valve

    Type CH (Orbinox)
    Pressure: 16
    Nominal size: bis DN3500

    “The Orbinox fixed cone valve type CH is a special round valve for the shut-off or control of water in dams, pumping processes and in hydropower plants.

    The gate valve in a sturdy welded design is available in many design options depending on the dimensions, operating pressure or required material. “

    Data sheet

    LDM Valves, 2- und 3-Wege Regelventile

    (LDM Valves)
    Pressure: PN16-PN40
    Nominal size: DN15-300
    "Straight and 3-way type control valve with a mixing or distribution function. Housing material: Spheroidal cast iron, cast steel, stainless steel. Turndown ratio: 50:1 Optionally with bellows, LDM spline, perforated cone, Oxygen and food-compatible design available Nominal diameters: from DN15 - DN300, PN16 - PN40 Temperatures: from -20°C to +500°C Leakage rate class: III/IV according to EN1349 Length according to EN 558-1 Approvals: CE, ATEX, ISO9001:215, TRD100/110/201, TRB 801, ISO14001:2015, OHSAS"

    Limit switch box

    Type d-Box, neptun, flex (Eurotec)
    In addition to our Eurotec main products, the wave and i-Box, we also have all the other Eurotec limit switch boxes in our range. flex Box: Nomen est omen - this model is particularly flexible and is suitable for harsh conditions with particular requirements for stability and load capacity as well as for applications with a salty atmosphere, sulfur gases and ammonia nitrate. neptun: made of high-quality stainless steel, it is particularly resistant to corrosion and pitting. For use in offshore applications, the chemical industry and environments with a salty atmosphere, sulfur gases, ammonia nitrate and numerous other aggressive media. big Box: For large cylindrical sensors with an M30 thread or special length. Eurobox: For larger and above all longer sensors. These include the d-Box, the neptun, the Eurobox, the flex model as well as the big box or the plastic version. Please visit the manufacturer's website or contact one of our team for more information on these products.

    Limit switch box

    Type wave (Eurotec)
    "The all-rounder: flexible, compact and easy to stock. The wave limit switch box was developed in 2008 and is still produced exclusively in Germany today. The Eurotec wave is very flexible with its classic design. It accommodates 1-4 mechanical microswitches and sensors in the V3 design. Slot initiators and cylindrical sensors (max. diameter 18 mm / max. length 50 mm) can also be installed. The housing is available in polyamide, Vestamid and aluminium. All versions of the wave series achieve protection class IP67 due to the curved bonnet. There is a low-cost version with a very stable glass fibre-reinforced plastic bracket and a chemical version with our high-quality stainless steel bracket MBHV. All brackets are height and width adjustable and are included as standard."