Flowtec Industriearmaturen banneroverlay

Just a few clicks
to your desired product.

Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.

Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.

Filter the results

Showing 49–54 of 67 results

    Limit switch box

    Type i-box (Eurotec)
    Compact, simple and efficient. The i-box is produced by the quality manufacturer Eurotec in Germany. Thanks to its sophisticated mounting system, it can be quickly and easily installed directly on the actuator and is therefore extremely space-saving. Despite its very compact design, it offers space for 1 to 2 mechanical toggle switches or inductive sensors in the V3 design. Its large OPEN-CLOSED display is still visible even from a distance. Alternatively, it can be equipped to display T or L-bores. The standard version is suitable for an 80x30 mm actuator bore pattern with shaft heights of 20 and 30 mm. The height and width adjustable stainless steel bracket IMBHV is required for other bore patterns. The i-box housing achieves protection classes IP66 and IP67 according to DIN EN 60529.

    Metal seated DIN swing check valves

    Type 270-570 / 280-580 / 280-580 / 290-590 / 290-590 / 291-591 / 296-596 / 297-597 (R.T. Valvole)
    Pressure: 25 / 40 / 63 / 100 / 160 / 250 / 320
    Nominal size: 50 - 900

    “RT gate valves valvole in cast design are used to prevent backflow in pipe systems. Due to their fully open design, this results in minimal pressure drop.

    Design:
    * The housing material is made of cast steel. The valves have a bolted or pressure seal bonnet (for higher pressure).
    * The valve disc is made with forged material. On request, the disc can be supplied with an overlay of Stellite or other materials.
    * The disc hinge joint is designed in such a way to achieve a
    perfect tightness, which means a self-positioning disc system. “

    Metal seated, DIN flanged ball valve, long pattern, floating

    Type 3563 / 3599 (JC Valves)
    Pressure: 100bar
    Nominal size: 15 - 200

    “The JC Valves metal seated ball valve type 3563 / 3599 is a floating flanged ball valve with a metal seat and long DIN face to face length.

    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. A large selection of materials makes the flanged ball valve flexible to use. “

    Installation guide

    Metal seated, forged monobloc ball valve

    Type UDV (JC Valves)
    Pressure: 240bar
    Nominal size: 1/2" - 2"

    “The JC Valves type UDV is a metal seated monoblock ball valve that can be used for high pressures up to 240 bar.
    The valve is uni-directional and can be designed with both bolted and welded ends.
    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
    Thanks to a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), this monoblock ball valve can be used in virtually all industries. A large selection of materials opens up a wide range of applications. “

    Data sheet
    Installation guide

    Needle valve

    Type RKS / RKV (ERHARD)
    Pressure: '10 / 16 / 25 / 40 / 63 / 100 / 160
    Nominal size: 100 - 2000
    ERHARD needle valves are innovative valves for the safe control of pressure stages and flow rates. The control valves type RKS/RKV are characterised above all by optimised flow behaviour and ultra-low pressure losses when fully open. The control range can extend up to 96%. There are different control inserts for each area of application in order to cover all operating cases: a vaned ring, slotted cylinder, pipe cylinder and other special inserts. The needle valves have a wide main seal in the cavitation-free space and also an additional shaft seal.

    Non contact rising stem ball valve

    Type RSBV (Control Seal)
    Pressure: ANSI 150 - ANSI 2500 (~PN20 - 420)
    Nominal size: 1" - 36"
    Extra robust! Non contact rising stem ball valves are designed for extreme applications. They have a special rotary-axial movement that eliminates any wear and ensures 100% tightness.