Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 31–36 of 93 results
ANSI double block and bleed ball valve, floating
“The JC Valves “double block & bleed” (DBB) valves are designed and produced to provide a reliable alternative to multi-stage shut-off valves.
They reduce the possible leakage points, lower installation and maintenance costs.
Combining all the shut-off and drain components within a valve leads to a significant reduction in weight and piping.
The valves are either available in a flanged or bolted design.”
ANSI flanged ball valve, semi trunnion
“The JC Valves types 1515 and 1530 are flanged ball valves according to ANSI with a semi-trunnion bearing. It is important to note that the seal is not live loaded and is therefore not innately pressed onto the ball.
This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating and those of the trunnion ball valve and fills the gap between these two.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. Another advantage is also the availability of a large selection of materials that makes the ball valve even more flexible. “
ANSI gate valve
“The JC Valves gate valves are designed with either a bolted or pressure seal bonnetand a flexible wedge. The valve can be produced with nominal diameters greater than 2 1/2”.
The valve is designed with an outside screwed stem and according to ANSI.
This gate valve is mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”
ANSI gate valve, forged design
“The JC Valves gate valves are designed with either a bolted or pressure seal bonnet and a flexible wedge. The valve can be produced with nominal diameters greater than 2 1/2”. The valve is designed with an outside screwed stem and according to ANSI.
The JC Valves ANSI gate valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”
ANSI metal seated flanged ball valve, floating
“The JC Valves ball valve type 3515 / 3530 is a floating ball valve according to ANSI with a metal seat. It is a flanged ball valve for ANSI piping.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. Another advantage is the large selection of materials that makes the ball valve even more flexible. “
ANSI on/off and control valve (gland seal / bellows seal)
“JC Valves shut-off and control globe valves with a gland packing seal are made with either a bolted or pressure seal bonnet. Both variants are designed in such a way that the disc and seat can be replaced.
The valve has an outside screwed stem in according to ANSI.
The shut-off and control globe valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”