Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 43–48 of 101 results
Ball valve
“Due to the spring-loaded seat construction, Somas ball valves offer good tightness regardless of the differential pressure.
The Somas ball valves type SKV are full bore valves with nominal diameters from DN25 – DN400 and have a floating ball (floating design) with spring-loaded seats.
Ball valves with nominal diameters from DN450 – DN500 have a ball (trunnion mounted) which is guided up and down in bushes and is called a valve type SKVT.
“
Barstock control valve
The barstock control valve has been specially developed for applications in reverse osmosis plants.
The barstock control valve type RC250 is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT female thread.
Butterfly valve damper
The throttle valves RD and RA are designed as a wafer type valve with a centric valve disc and are suitable for operating temperatures up to 800°C, depending on the choice of material.
For flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47. Lengths according to the company standard.
Connecting flange for actuators to DIN EN ISO 5211.
Testing according to DIN EN 12266.
Versions:
RD without seat (leakage approx. 1% of surface equivalent),
RA with metal travel stop ring (leakage approx. 0.5% of surface equivalent),
RA with seal ring (leakage approx. 0.3% of surface equivalent),
RA with metal travel stop ring with seal ring (leakage approx. 0.1% of surface equivalent)
Centric flanged / double flanged butterfly valve
CeraValve ceramic lined ball valve
Cera Valve offers wear and corrosion-resistant ceramic lined ball valves for on/off and control functions.
The use of ceramic-lined valves make sense wherever standard valves reach their limits (abrasion, corrosion, temperature and pressure).
A large selection of variuos ceramic materials allows for solutions for almost all industrial sectors. Special adaptations and special applications are also solved in close cooperation with our customers.
CeraValve ceramic lined sliding disc valve
Cera Valve offers wear and corrosion-resistant sliding disc valves for on/off and control functions.
The medium flows exclusively in ceramic with this design. It is therefore suitable for highly corrosive media.
Other advantages: very good control of small amounts of media containing solids and completely cavity free.
A large selection of ceramic materials allows for solutions for almost all industrial sectors.
Special adaptations and special applications are also solved in close cooperation with our customers.
The ceramic lined sliding disc valve is used in waste incineration plants:
– Dosing of HCI washing water (pre-washer)
– Dosing of limewash to the absorber (pH regulation, desulfurisation)
and in the chemical industry as an – Alternative to PTFE / PFA lined valves if a medium is abrasive and / or prone to diffusion.
– Alternative to valves made of special materials. (e.g. Hastelloy, titanium, etc.)