Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 49–54 of 101 results
CeraValve partially ceramic lined ball valve
The ball valve BR 26 CERA is a stainless steel ball valve for on/off functions only with ceramic seats and a ceramic ball for use in less abrasive and low corrosive applications.
The basic principle is based on the “floating ball” design. The seats are pressed against the ball by O-rings. This valve can be supplied with a manual handle with a pneumatic or electric actuator.
Compact ball valve, soft seated
Due to its compact design, the compact Adler ball valve (Type FA1/FB1/FC1/FA2/FB2/FC2) is a space-saving variant of the flanged way ball valves.
The valve is made of steel or stainless steel and can be produced as a wafer or flanged ball valve. Depending on the type, the valve is made of cast or solid material.
The compact Adler ball valve is used in all industries.
DIN flanged ball valve, semi trunnion, long/short pattern series
“The JC Valves type 1516 / 1540 / 1316 and 1340 are flanged ball valves according to DIN with a trunnion bearing in long or short pattern.
This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating ball valve and those of the trunnion ball valve and fills the gap between the two.
It is important to note that the seat in these models is not live loaded and is therefore not innately pressed onto the ball.
The standard version of the DIN flanged ball valve with a trunnion mounted ball includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
The large variety of materials opens up a wide range of applications for this series.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. “
DIN gate valve, small body metal seat
The BFE (Bonney Forge) metal seated, small shut-off gate valve has an outside screwed rising stem, solid wedge and flange connection.
The gate valves are forged and used for non-aggressive liquids, steam and gas.
DIN on/off and control globe valve
“Shut-off control valve with a pressure balanced cone (from DN200), linear flow characteristics and a position indicator.
Available with a gland seal or bellows seal.
The valve can optionally be designed with a control cone or without oil and grease.
For nominal diameters from DN15 – DN400.
Can be used in temperature ranges of -60°C to +550°C depending on the choice of material. “
DIN on/off and control globe valve, forged with gland seal or bellows seal
“The Wakmet metal seated (Type 218 / 218R / 218M / 412 / 422 / 412M / 422M / 530 / 530M / 648M / 649M) globe and regualting valves made of forged steel with a gland or bellows seal, have a one-piece housing and are available with or without a control cone.
The monolithic design allows 100% tightness in both flow directions. The valves are mainly used in the energy sector as well as in various areas in the pulp and paper industry.