Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 31–36 of 46 results
DIN swing check valve, forged
Wakmet check valves prevent the backflow of medium into the pipe.
The forged welded design prevents material defects such as cracks or porosity and excludes non-metallic impurities.
A completely open disc provides a full bore so the flow rate remains unaffected. A version with a bypass valve is available on request.
The metal seated DIN check valves KZS/KZK are mainly used in the energy sector for energy applications as well as in the pulp and paper industry.
Double gate knife gate valve
“The knife gate valve type DT from Orbinox is a bi-directional gate valve that is mainly used for higher consistencies in the pulp and paper industry (paper recycling), but is particularly used for heavily contaminated fibrous media.
Closing and opening times are only half as long as with other gate valves.
All parts that are subject to wear can be easily replaced.”
Flächengewichtsventil
The Somas ball segment valves type KVTW / KVTF are basis weight valves with a special seat for low torque requirements and offered in combination with a step motor as an accurate control valve. The control valve unit consists of a balanced valve with a drive and control element.
The Somas basis weight valve is used in the paper industry.
Low noise ball segment valve
Somas ball segment valves type KVTW LN (KVTF LN) with a centrically mounted shaft and KVXW LN (KVXF LN) with an eccentrically mounted shaft were developed to reduce noise levels.
The reduction in the noise level is achieved by the installation of a noise-reducing device. The noise-reducing device is mounted behind the ball segment and consists of several steel rods in a specific arrangement. These steel rods distribute the pressure drop over several stages. This reduces the noise level and prevents any cavitation.
The KVTW LN and KVXW LN are supplied as wafer type valves and the KVTF LN and KVXF LN as flange type valves.
Metal seated, DIN flanged ball valve, long pattern, floating
“The JC Valves metal seated ball valve type 3563 / 3599 is a floating flanged ball valve with a metal seat and long DIN face to face length.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. A large selection of materials makes the flanged ball valve flexible to use. “
Metal seated, forged monobloc ball valve
“The JC Valves type UDV is a metal seated monoblock ball valve that can be used for high pressures up to 240 bar.
The valve is uni-directional and can be designed with both bolted and welded ends.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
Thanks to a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), this monoblock ball valve can be used in virtually all industries. A large selection of materials opens up a wide range of applications. “