Flowtec Industriearmaturen banneroverlay

Just a few clicks
to your desired product.

Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.

Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.

Filter the results

Showing 43–48 of 59 results

    Limit switch box

    Type i-box (Eurotec)
    Compact, simple and efficient. The i-box is produced by the quality manufacturer Eurotec in Germany. Thanks to its sophisticated mounting system, it can be quickly and easily installed directly on the actuator and is therefore extremely space-saving. Despite its very compact design, it offers space for 1 to 2 mechanical toggle switches or inductive sensors in the V3 design. Its large OPEN-CLOSED display is still visible even from a distance. Alternatively, it can be equipped to display T or L-bores. The standard version is suitable for an 80x30 mm actuator bore pattern with shaft heights of 20 and 30 mm. The height and width adjustable stainless steel bracket IMBHV is required for other bore patterns. The i-box housing achieves protection classes IP66 and IP67 according to DIN EN 60529.

    Metal seated, DIN flanged ball valve, long pattern, floating

    Type 3563 / 3599 (JC Valves)
    Pressure: 100bar
    Nominal size: 15 - 200

    “The JC Valves metal seated ball valve type 3563 / 3599 is a floating flanged ball valve with a metal seat and long DIN face to face length.

    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. A large selection of materials makes the flanged ball valve flexible to use. “

    Installation guide

    Metal seated, forged monobloc ball valve

    Type UDV (JC Valves)
    Pressure: 240bar
    Nominal size: 1/2" - 2"

    “The JC Valves type UDV is a metal seated monoblock ball valve that can be used for high pressures up to 240 bar.
    The valve is uni-directional and can be designed with both bolted and welded ends.
    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
    Thanks to a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), this monoblock ball valve can be used in virtually all industries. A large selection of materials opens up a wide range of applications. “

    Data sheet
    Installation guide

    Non contact rising stem ball valve

    Type RSBV (Control Seal)
    Pressure: ANSI 150 - ANSI 2500 (~PN20 - 420)
    Nominal size: 1" - 36"
    Extra robust! Non contact rising stem ball valves are designed for extreme applications. They have a special rotary-axial movement that eliminates any wear and ensures 100% tightness.

    Pinch valve aiRFlex®

    Type BS (RF Valves)
    Pressure: 4bar
    Nominal size: DN25 - DN350

    “The aiRFlex® pinch valve is designed for abrasive, corrosive and scaling sludge, liquids and powders.

    It is characterised by a full bore and it is interchangeable with most ball valves and diaphragm valves.

    Technical advantages:
    * Patented expansion folds prevent stretching. This reduces the stress on the tube and significantly increases the service
    life
    * No moving parts – tube is the only wear part.
    * Trouble-free operation – no blocking or clogging.
    * Increased service life of the tube, which does not stretch when closed.
    * Cost-effective solutions as no actuator is required.
    * The tube can be replaced without having to remove the valve from the line, thus guaranteeing low maintenance and operating costs.

    Operating pressure about 2 bar below
    the available factory air supply, up to
    max. 6 bar.
    The MONSYS monitoring system prevents
    unexpected emergency repairs.
    “

    Pinch valve RF VALVE

    Type BE / BO (RF Valves)
    Pressure: 1 - 20bar
    Nominal size: DN25 - DN1500

    “The pinch valve RF is designed for abrasive, corrosive and scaling sludge, solids, liquids and powders.
    It is characterised by a full bore and it is interchangeable with most ball valves and diaphragm valves.

    The MONSYS monitoring system prevents unexpected emergency repairs.

    Technical advantages:
    * Patented expansion folds prevent stretching, thus reducing the stress on the tube and significantly increasing the service life.
    * No moving parts so the tube is the only wear part.
    * Trouble-free operation: no blocking or clogging.
    * Increased service life of the tube, which does not stretch when closed.
    * Cost-effective solutions as no actuator is required.

    Available in nominal diameters from DN25 – DN 1500
    The tube can be replaced without having to remove the valve from the line, thus resulting in low maintenance and operating costs.

    Actuator types: pneumatic, electric and hydraulic”
    * Kostengünstige Lösung, da kein Antrieb benötigt wird.

    Erhältlich in den Nennweiten DN25 – DN 1500
    Der Schlauch kann gewechselt werden, ohne daß die Armatur aus der Leitung herausgenommen werden muss, was in niedrigen Wartungs- und Betriebskosten resultiert.

    Antriebsarten: pneumatisch, elektrisch und hydraulisch”