Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 73–78 of 107 results
Metal seated, forged monobloc ball valve
“The JC Valves type UDV is a metal seated monoblock ball valve that can be used for high pressures up to 240 bar.
The valve is uni-directional and can be designed with both bolted and welded ends.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
Thanks to a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), this monoblock ball valve can be used in virtually all industries. A large selection of materials opens up a wide range of applications. “
Non contact rising stem ball valve
On/off and control butterfly valves
The throttle valves HRD and HRA are designed as a wafer type valve with a centric valve disc.
Depending on the choice of material, they are designed for operating temperatures up to 1050°C. In the high-temperature version, they have a welded wafer type housing or a one-piece housing.
The throttle valves are suitable for valves according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47, with lengths according to DIN EN 558-1-R20, as well as from DN400 according to the company standard.
The connecting flange is for actuators according to DIN EN ISO 5211.
Testing according to DIN EN 12266.
SIL approval according to ICE 61508 and ICE 61511
Versions:
HRD without seat (leakage approx. 1% of surface equivalent),
HRA metal seated (leakage approx. 0.5% of surface equivalent), HRA with seal ring (leakage approx. 0.3% of surface equivalent),
HRA with metal travel stop ring with seal ring (leakage approx. 0.1% of surface equivalent)
On/off and quick-closing butterfly valve
PFA lined ball valve, Neotecha
Um eine besonders gute mechanische Festigkeit des Kerns und eine hohe chemische Beständigkeit der Auskleidung zu erreichen hat Neotecha eine spezielle Technik entwickelt um PFA auf einen Metallkern aufzutragen. Mit dieser Technik bietet Neotecha Armaturen die weltweit bekannt sind, für ihre Zuverlässigkeit in den schwierigsten korrosiven Anwendungen. Der PFA-ausgekleidete Kugelhahn von Neotecha-Emerson eignet sich aufgrund seiner qualitativ hochwertigen Verarbeitung hervorragend um gute Standzeiten in den härtesten Prozessumgebungen zu erreichen. Zuverlässigkeit in den anspruchsvollsten korrosiven Anwendungen!
Pinch valve aiRFlex®
“The aiRFlex® pinch valve is designed for abrasive, corrosive and scaling sludge, liquids and powders.
It is characterised by a full bore and it is interchangeable with most ball valves and diaphragm valves.
Technical advantages:
* Patented expansion folds prevent stretching. This reduces the stress on the tube and significantly increases the service
life
* No moving parts – tube is the only wear part.
* Trouble-free operation – no blocking or clogging.
* Increased service life of the tube, which does not stretch when closed.
* Cost-effective solutions as no actuator is required.
* The tube can be replaced without having to remove the valve from the line, thus guaranteeing low maintenance and operating costs.
Operating pressure about 2 bar below
the available factory air supply, up to
max. 6 bar.
The MONSYS monitoring system prevents
unexpected emergency repairs.
“