Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 13–18 of 107 results
Bi-directional knife gate valve, stainless steel
“The knife gate valve model EB from Orbinox in a stainless steel design is a bi-directional knife gate valve designed for general industrial applications.
The design of the housing and seat ensures blockage-free shut-off when using suspended solids in many areas.”
Metal seated butterfly valve
Somas shut-off valves type MTV, MTVF and MTVL are on/off valves and control valves.
These valves are designed to control many different liquids, gases and steam over a wide temperature range.
They are all triple eccentric valves and due to the unique design of the valve disc, a solid stainless steel seat can be used. This solid seat is resistant to high flow velocities and temperatures. This allows us to achieve high functional reliability even in difficult applications.
The MTV valve can be supplied as a wafer type or lug type valve.
The valve type MTVF is a double flanged valve. They are normally supplied with a metal seat.
Sampling valve for pharmaceutical applications
Das Probenahmeventil 616M von Guicon ist speziell für die Anwendung im Pharmabereich konzipiert.
Die Armatur ist totraumfrei, hat innen und außen polierte Oberflächen bzw. verfügt über einen Pot, um Produktproben direkt entnehmen zu können.
Ball segment valve, wafer design, short face-to-face dimension
“The unique system of a shaft with a clamping coupling was developed by Somas for backlash-free torque transmission and enables extremely precise control behaviour.
The Somas ball segment valves type KVTW with a centrically mounted shaft and type KVXW with an eccentrically mounted shaft are produced in a wafer version. The D-version of the valve is produced with a short length.
The valve is also produced in the A-version with the standard length (see Si-113).
The valve body of the wafer type ball segment valves is produced in one piece. The spring seat is available in three material alternatives (PTFE, PTFE 53 and HiCo [high cobalt alloy]).”
Ball segment valve, wafer design, standard face-to-face dimension
“The unique system of a shaft with a clamping coupling was developed by Somas for backlash-free torque transmission and enables extremely precise control behaviour.
The valve body of the Somas wafer type ball segment valve KVTW-A / KVXW-A is produced in one piece.
The spring seat is available in three material alternatives (PTFE, PTFE 53 and HiCo [high cobalt alloy]).
The type KVTW with a centrically mounted shaft, as well as the type KVXW with an eccentrically mounted shaft are produced in a wafer version. The A-version of the valve is produced in the standard long lengths typical of the market.
The valve is also produced in the D-version with a shorter length (see Si-114).
“
3-piece ball valves
The ICP Valves 3-piece ball valves have a 3-piece nody and are made of stainless steel, in a floating version with a full bore valve design.
Connections:
– KH 140: Thread according to DIN 259/2999 (GAS)
– KH 141: Thread according to ASME B1.20.1 (NPT)
– KH 142: Socket weld ends according to ASME B16.11 & DIN 3239 part 2
– KH 143: Butt weld ends according to ASME B16.25 & DIN 3239 part 1
Marking: CE – PED
PN63 (up to 2”) / PN25 (2½“-4“)