Just a few clicks
to your desired product.
Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.
Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.
Filter the results
Showing 25–30 of 107 results
DIN high pressure, double plate wedge gate valve
The forged welded design of the metal seated DIN high-pressure gate valves are made of forged steel with a gland seal or bellows seal prevents material defects such as cracks or porosity.
This type of design ensures that non-metallic impurities are eliminated or excluded.
Wakmet protects the valve against overpressure with a safety valve unit. This type of construction allows easier isolation of the gate valve and direct access to the preset safety valve.
Axial bearing for easier opening/closing of the valve.
This valve is mainly used in the energy sector and in the area of the pulp and paper industry.
Wafer / lug type butterfly valve
The TTV centric flanged / double flanged butterfly valve is available in a wide range of materials.
Depending on the application, the seats are available in the most common material EPDM or NBR, but also in different types of silicone, Hypalon, Nordel, Viton and many others.
Suitable for all industries and the most diverse applications due to the different choice of seats.
Depending on the application, available in the most common material EPDM or NBR and in different types of silicone, Hypalon, Nordel, Viton and many others.
PTFE lined butterfly valve
The ChemValve-Schmid butterfly valve CST is the world’s leading modular PTFE lined butterfly valve.
The PTFE lined valve is produced to the highest quality standards for the safe handling of aggressive media. It is designed for the use with highly chemical media and is therefore used in almost all industries.
Spherical structural elements reduce friction and therefore increase the service life.
3-way ball valve, soft seated, compact design
Due to its compact design, the Adler 3-way ball valve is a space-saving variant of the flanged 3-way ball valves.
The ball is fully bored and can be designed with an “L” or “T” bore. The valve is made of steel or stainless steel and can be produced as a wafer design ball valve or with female thread.
ANSI cast trunnion design, flanged ball valve, soft/metal seated
“The JC Valves ball valve type 2515 and 2530 are flanged cast trunnion ball valves according to ANSI Class 150 or 300 respectively. They can be designed as both soft and metal seated valves. A large selection of materials makes the ball valve even more flexible.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. “
ANSI double block and bleed ball valve, floating
“The JC Valves “double block & bleed” (DBB) valves are designed and produced to provide a reliable alternative to multi-stage shut-off valves.
They reduce the possible leakage points, lower installation and maintenance costs.
Combining all the shut-off and drain components within a valve leads to a significant reduction in weight and piping.
The valves are either available in a flanged or bolted design.”