Flowtec Industriearmaturen banneroverlay

Just a few clicks
to your desired product.

Our product finder will help you find the right standard valve. Just a few clicks will guide you through our wide range of products to your desired product.

Not found what you are looking for? Our range of valves goes much further. Please contact us directly for special products and individual consulting.

Filter the results

Showing 13–18 of 63 results

    Uni-directional high performance knife gate valve

    Type HK (Orbinox)
    Pressure: 16
    Nominal size: 50-1200

    “The knife gate valve type HK from Orbinox is a uni-directional wafer valve for general industrial applications. The gate valve can be used for consistencies up to 5%.

    The design of the housing and seat ensures blockage-free shut-off when using fibrous media and media containing solids in many industrial sectors.
    The cast sealing ring system (type K) improves the tightness and makes it easier to change seals.”

    Data sheet
    Installation guide

    Uni-directional knife gate valve

    Type EX (Orbinox)
    Pressure: 10
    Nominal size: 50-1200

    “The standard knife gate valve type EX from Orbinox is a uni-directional wafer valve. It is suitable for general industrial applications.

    The design of the housing and seat ensures blockage-free shut-off when using suspended solids in many industrial sectors.”

    Data sheet
    Installation guide

    Control valve

    Type RV (ERHARD)
    Pressure: '16 / 25 / 40
    Nominal size: 50 - 150
    ERHARD control valves type RV are designed for throttling and regulation in water treatment and water distribution plants as well as in hydropower plants. The slotted bush also provides optimum flow behaviour for harmless energy conversion. The control valve is ideally suited for continuous operation during cavitation. The ERHARD control valve is available with a handwheel, electric actuator, hydraulic or pneumatic piston actuator. A straight or angle version is possible.

    PTFE lined butterfly valve

    Type Typ CST economyLine (ChemValve-Schmid)
    Pressure: 10 (16)
    Nominal size: 25 - 1200

    The ChemValve-Schmid butterfly valve CST is the world’s leading modular PTFE lined butterfly valve.

    The PTFE lined valve is produced to the highest quality standards for the safe handling of aggressive media. It is designed for the use with highly chemical media and is therefore used in almost all industries.

    Spherical structural elements reduce friction and therefore increase the service life.

    Data sheet
    Installation guide

    3-way control valve

    Type RC230 (USA: Typ 564 / 1118) (Badger Meter)
    Pressure: max. 100 bar
    Nominal size: 1/4", 1/2", 3/4", 1"

    The Badger Meter 3-way control valve RC230 stands for very precise control.

    It is particularly suitable for the control of liquids, gases or steam in general industry, research, development and pilot plants.

    Due to its compact size, this 3-way control valve is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates. The valve is designed as standard with an NPT female thread.

    ANSI on/off and control valve (gland seal / bellows seal)

    Type VG150BB / VG300BB / VG600BB / VG900BB / VG1500BB / VG2500BB / VG900PS / VG1500PS / VG2500PS (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 2" - 16"

    “JC Valves shut-off and control globe valves with a gland packing seal are made with either a bolted or pressure seal bonnet. Both variants are designed in such a way that the disc and seat can be replaced.
    The valve has an outside screwed stem in according to ANSI.

    The shut-off and control globe valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”