Flowtec Industriearmaturen banneroverlay

Find the right sampling valve for your requirements!

Our valve finder will help you find the right sampling valve for your requirements. Searched and not found? Our range goes much further. For special products and individual advice, contact us directly.

Filter the results

Showing 7–12 of 160 results

    Analog positioner

    Type Typen V200P, V200E, V200IS (VAC)

    The V200 is an analogue and electrpneumatic positioner for mounting on pneumatic linear and part-turn actuators. It is characterised by a compact, robust modular design and an excellent price-performance ratio.

    The adjustment to the actuator is carried out by means of cam discs and mechanical screws, so that simple adjustments are possible and good control behaviour can be achieved.

    Analog positioner

    Type SP / SPE405 (Somas)

    “The Somas pneumatic positioner type SP405 (0.2-1 bar) and the electro-pneumatic positioner type SPE405 (4…20 mA) were developed to meet the requirements of the process industry.

    Somas positioners are designed for a rotary movement up to 90° and are designed for actuators and valves with a part-turn actuator, but can also be easily adapted to actuators with linear movement. “

    ANSI cast trunnion design, flanged ball valve, soft/metal seated

    Type 2515 / 2530 (JC Valves)
    Pressure: 50bar
    Nominal size: 2" - 16"

    "The JC Valves ball valve type 2515 and 2530 are flanged cast trunnion ball valves according to ANSI Class 150 or 300 respectively. They can be designed as both soft and metal seated valves. A large selection of materials makes the ball valve even more flexible. The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. "

    ANSI double block and bleed ball valve, floating

    (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 1/2" - 4"

    "The JC Valves “double block & bleed” (DBB) valves are designed and produced to provide a reliable alternative to multi-stage shut-off valves. They reduce the possible leakage points, lower installation and maintenance costs. Combining all the shut-off and drain components within a valve leads to a significant reduction in weight and piping. The valves are either available in a flanged or bolted design."

    ANSI flanged ball valve, semi trunnion

    Type 1515 / 1530 (JC Valves)
    Pressure: 50bar
    Nominal size: 8" - 12"

    "The JC Valves types 1515 and 1530 are flanged ball valves according to ANSI with a semi-trunnion bearing. It is important to note that the seal is not live loaded and is therefore not innately pressed onto the ball. This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating and those of the trunnion ball valve and fills the gap between these two. The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. Another advantage is also the availability of a large selection of materials that makes the ball valve even more flexible. "

    ANSI gate valve

    Type VC150BB / VC300BB / VC600BB / VC900BB / VC1500BB / VC2500BB / VC900PS / VC1500PS / VC2500PS (JC Valves)
    Pressure: 10 - 172bar
    Nominal size: 2" - 36"

    "The JC Valves gate valves are designed with either a bolted or pressure seal bonnetand a flexible wedge. The valve can be produced with nominal diameters greater than 2 1/2”. The valve is designed with an outside screwed stem and according to ANSI. This gate valve is mainly used in the oil and gas, chemical, petrochemical, energy and mining industries."