Awaiting product image

Cryogenic and high temperature control valve

Category:

Additional information

Marken

Badger Meter
Funktion

Control valves
Industrie

Petroleum, chemical, Pharmaceutical, Steel
Anwendung

High pressure, Low temperature/ cryogenic
Betriebstemperatur

Cyrogenic
Nenndruck

PN, 160

Related products

    DIN on/off and control globe valve

    (LDM Valves)
    Pressure: PN16-PN40
    Nominal size: DN15 - DN400

    “Shut-off control valve with a pressure balanced cone (from DN200), linear flow characteristics and a position indicator.

    Available with a gland seal or bellows seal.
    The valve can optionally be designed with a control cone or without oil and grease.
    For nominal diameters from DN15 – DN400.
    Can be used in temperature ranges of -60°C to +550°C depending on the choice of material. “

    Control valve

    Type RV (ERHARD)
    Pressure: '16 / 25 / 40
    Nominal size: 50 - 150
    ERHARD control valves type RV are designed for throttling and regulation in water treatment and water distribution plants as well as in hydropower plants. The slotted bush also provides optimum flow behaviour for harmless energy conversion. The control valve is ideally suited for continuous operation during cavitation. The ERHARD control valve is available with a handwheel, electric actuator, hydraulic or pneumatic piston actuator. A straight or angle version is possible.

    Standard angle control valve

    Type RC220 (Badger Meter)
    Pressure: max.340 bar
    Nominal size: 1/4", 1/2", 3/4", 1"

    The standard angle control valve RC220 is used for the control of liquids, gases or steam in general industry, research, development and pilot plants.

    Due to its compact size, it is suitable for medium to small flow rates and is reliable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.

    It is designed as standard with an NPT female thread.

    Globe valves in 2- and 3-way design

    (Burocco)
    Pressure: 16 / 40
    Nominal size: 15 -100

    The Burocco soft or metal seated 3-way control valves are specially designed for control operations in medium and low-capacity plants.

    The Burocco control valves have a 3-way body with screwed seats and a switching or mixing function. The valve cone type V-Port is guided into the seats from above and below.

    Seal type: Soft (class VI) or metal (class IV – V)
    Characteristic: Linear