Additional information
| Marken | Badger Meter |
|---|---|
| Funktion | Control valves |
| Industrie | Petroleum, chemical, Pharmaceutical, Steel |
| Anwendung | High pressure, Low temperature/ cryogenic |
| Betriebstemperatur | Cyrogenic |
| Nenndruck | PN, 160 |
Cryogenic and high temperature control valve
Related products
DIN on/off and control globe valve
(LDM Valves)
Pressure: PN16-PN40
Nominal size: DN15 - DN400
“Shut-off control valve with a pressure balanced cone (from DN200), linear flow characteristics and a position indicator.
Available with a gland seal or bellows seal.
The valve can optionally be designed with a control cone or without oil and grease.
For nominal diameters from DN15 – DN400.
Can be used in temperature ranges of -60°C to +550°C depending on the choice of material. “
High pressure control valve
Type HP-10 (10000psi) (Badger Meter)
Pressure: max. 689 bar
Nominal size: 1/4", 1/2"
The high-pressure control valve type HP-10 is used wherever the standard type RC200 comes to its limits due to too high pressure.
The high-pressure control valve type HP-10 is the right valve for liquids and gases in high-pressure applications with medium to small flow rates and is available as a globe or angle valve.
ANSI on/off and control valve (gland seal / bellows seal)
Type VG150BB / VG300BB / VG600BB / VG900BB / VG1500BB / VG2500BB / VG900PS / VG1500PS / VG2500PS (JC Valves)
Pressure: 10 - 172bar
Nominal size: 2" - 16"
“JC Valves shut-off and control globe valves with a gland packing seal are made with either a bolted or pressure seal bonnet. Both variants are designed in such a way that the disc and seat can be replaced.
The valve has an outside screwed stem in according to ANSI.
The shut-off and control globe valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries.”
Control valve
Type RV (ERHARD)
Pressure: '16 / 25 / 40
Nominal size: 50 - 150
ERHARD control valves type RV are designed for throttling and regulation in water treatment and water distribution plants as well as in hydropower plants. The slotted bush also provides optimum flow behaviour for harmless energy conversion.
The control valve is ideally suited for continuous operation during cavitation.
The ERHARD control valve is available with a handwheel, electric actuator, hydraulic or pneumatic piston actuator. A straight or angle version is possible.