Awaiting product image

Globe valves in 2- and 3-way design

Category:

Additional information

Marken

Burocco
Funktion

Control valves
Industrie

Energy, Plant engineering & construction
Anwendung

Steam and energy
Nenndruck

PN, 16, 40

Related products

    Cryogenic and high temperature control valve

    Type RC260 (USA: Typ 884) (Badger Meter)
    Pressure: max.172 bar
    Nominal size: 1/4", 1/2", 3/4", 1"

    The Badger Meter cryogenic control valve has been specially developed for media with t<-50°C.

    It controls liquids, gases or steam in general industry, research, development and pilot plants.

    The bellows design must be used for the inner valves.

    LDM Valves, 2- und 3-Wege Regelventile

    (LDM Valves)
    Pressure: PN16-PN40
    Nominal size: DN15-300
    "Straight and 3-way type control valve with a mixing or distribution function. Housing material: Spheroidal cast iron, cast steel, stainless steel. Turndown ratio: 50:1 Optionally with bellows, LDM spline, perforated cone, Oxygen and food-compatible design available Nominal diameters: from DN15 - DN300, PN16 - PN40 Temperatures: from -20°C to +500°C Leakage rate class: III/IV according to EN1349 Length according to EN 558-1 Approvals: CE, ATEX, ISO9001:215, TRD100/110/201, TRB 801, ISO14001:2015, OHSAS"

    Control valve

    Type RV (ERHARD)
    Pressure: '16 / 25 / 40
    Nominal size: 50 - 150
    ERHARD control valves type RV are designed for throttling and regulation in water treatment and water distribution plants as well as in hydropower plants. The slotted bush also provides optimum flow behaviour for harmless energy conversion. The control valve is ideally suited for continuous operation during cavitation. The ERHARD control valve is available with a handwheel, electric actuator, hydraulic or pneumatic piston actuator. A straight or angle version is possible.

    DIN on/off and control globe valve, “stellite” version

    (LDM Valves)
    Pressure: PN16-PN40
    Nominal size: DN15-400
    "Shut-off control valve with a Stellite seat and a pressure balanced cone (from DN200) as well as linear flow characteristics. Available with a gland seal or bellows seal. For nominal diameters from DN15 - DN400 Can be used in temperature ranges of -60°C to +550°C depending on the choice of material."