Additional information
| Marken | Burocco |
|---|---|
| Funktion | Control valves |
| Industrie | Energy, Plant engineering & construction |
| Anwendung | Steam and energy |
| Nenndruck | PN, 16, 40 |
Globe valves in 2- and 3-way design
Related products
DIN on/off and control globe valve, “stellite” version
(LDM Valves)
Pressure: PN16-PN40
Nominal size: DN15-400
"Shut-off control valve with a Stellite seat and a pressure balanced cone (from DN200) as well as linear flow characteristics.
Available with a gland seal or bellows seal.
For nominal diameters from DN15 - DN400
Can be used in temperature ranges of -60°C to +550°C depending on the choice of material."
Cryogenic and high temperature control valve
Type RC260 (USA: Typ 884) (Badger Meter)
Pressure: max.172 bar
Nominal size: 1/4", 1/2", 3/4", 1"
The Badger Meter cryogenic control valve has been specially developed for media with t<-50°C.
It controls liquids, gases or steam in general industry, research, development and pilot plants.
The bellows design must be used for the inner valves.
Barstock control valve
Type RC250 (Badger Meter)
Pressure: max.345 bar
Nominal size: 1/4", 1/2", 3/4", 1"
The barstock control valve has been specially developed for applications in reverse osmosis plants.
The barstock control valve type RC250 is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
It is designed as standard with an NPT female thread.
3-way control valve
Type RC230 (USA: Typ 564 / 1118) (Badger Meter)
Pressure: max. 100 bar
Nominal size: 1/4", 1/2", 3/4", 1"
The Badger Meter 3-way control valve RC230 stands for very precise control.
It is particularly suitable for the control of liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, this 3-way control valve is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates. The valve is designed as standard with an NPT female thread.