Additional information
| Marken | Orbinox |
|---|---|
| Funktion | Control valves, On-off valves |
| Industrie | Water, waste water |
| Anwendung | Water & waste water |
| Nenndruck | Special pressure |
| Betriebstemperatur | Standard temperature |
Wall mounted penstock
Related products
Uni-directional knife gate valve
Type ET (Orbinox)
Pressure: 10
Nominal size: 50-900
“The knife gate valve from Orbinox type ET is a uni-directional knife gate valve for industrial applications according to MSS-SP-81 and TAPPI TIS 405-8 standards.
The design of the housing and seat ensures blockage-free shut-off when using suspended solids in many industrial sectors.”
Through conduit bi-directional high pressure knife gate valve
Type TH (Orbinox)
Pressure: 10
Nominal size: 300-1000
“The model TH from Orbinox is a bi-directional high pressure through conduit wafer valve. The knife gate valve is designed for media with a high consistency and can be used for consistencies up to 12%.
The valve can be used in a wide range of industrial sectors.
The bi-directional sealing principle ensures blockage-free shut-off in both flow directions.
All versions have a two-piece housing with internal sliding bars to ensure smooth operation.
The cast sealing ring system (type K) improves the tightness and makes it easier to change seals. “
Channel penstock
Type CC (Orbinox)
Pressure: 1
Nominal size: 150-2000
“The Orbinox channel gate type CC is designed with a 3-sided sealing and for use in waste water technology, irrigation, hydropower utilisation and similar areas of application.
The channel gate is a welded design in stainless steel (1.4301 / 1.4571) with a bolted-on elastomer seal.
The model offers many design options for different dimensions and operating pressures.
Actuator types: Manual operation, electric actuator, hydraulic actuator.”
Bulk handling hopper shape knife gate valve
Type XC (Orbinox)
Pressure: 10
Nominal size: 50-600
“The hopper shape knife gate valve XC from Orbinox is a uni-directional wafer valve, which was designed for bulk handling and is used for powdered or granular media.
The special design of the housing allows for optimal flow of the medium. The knife gate valve is therefore ideal for use as a hopper shape knife gate valve.”