Additional information
| Funktion | Control valves |
|---|---|
| Industrie | Energy, Pulp & paper |
| Anwendung | Chemical resistance, High temperature, Pulp & paper applications, Steam and energy |
| Nenndruck | ANSI, 150, PN, 10, 16, 25 |
| Marken | Somas |
Low noise control butterfly valve
Related products
Wafer / lug type butterfly valve
Type 20W/L9040 (TTV)
Pressure: PN10/16/ANSI150
Nominal size: DN32-600
The TTV centric flanged / double flanged butterfly valve is available in a wide range of materials.
Depending on the application, the seats are available in the most common material EPDM or NBR, but also in different types of silicone, Hypalon, Nordel, Viton and many others.
Suitable for all industries and the most diverse applications due to the different choice of seats.
Depending on the application, available in the most common material EPDM or NBR and in different types of silicone, Hypalon, Nordel, Viton and many others.
Plastic butterfly valve
Type EXTREME series (CEPEX)
Pressure: '6 / 10
Nominal size: 50 - 300
The CEPEX plastic butterfly valves can be used to shut off and control liquids.
The valves made entirely of plastic have the advantage that they are resistant to chemicals. The EXTREME series is designed for special requirements and can therefore be used in steel plants, chemical plants or the oil industry.
The plastic butterfly valve can be operated either manually or also automatically and is available in a wide variety of plastics (PVC-U, CPVC, PP-H, PVDF and ABS).
Metal seated butterfly valve for oil & gas applications
Type Typ MTV / MTVG / MTVL (Somas)
Pressure: 25
Nominal size: 80-500
“Somas valves type MTV, MTVG and MTVL are on/off valves and control valves that have been specially developed for oil and gas applications and are designed to control over a wide temperature range.
They are normally supplied with a metal seat.
They are all triple eccentric valves and due to the unique design of the valve disc, a solid stainless steel seat can be used. This solid seat is resistant to high flow velocities and temperatures. This allows us to achieve high functional reliability even in difficult applications.
The MTV valve can be supplied as a wafer type or lug type valve.
The valve type MTVG is a wafer valve with 4 guide bores.”
Metal seated butterfly valve for exhaust gas applications
Type VSS HAT / MTV HT (Somas)
Pressure: 25
Nominal size: 80-1200
“Somas has developed a range of metal seated butterfly / shut-off and control valves for exhaust gas applications that meet the requirements of EN 12516-2 and ASME B16.34.
Typical applications for these valves in diesel engines, gas engines and exhaust gas systems are:
waste gates, EGR, turbo shutdown, slow steaming, air bypass, gas scrubbers, heat recovery
Somas exhaust gas valves have many technical advantages.
The geometry of the disc is designed in such a way that it only comes into contact with the seal when it is fully closed. This ensures that the wear on the sealing surface is kept to a minimum and a long service life is guaranteed.
The valves have a solid seat design and are therefore resistant to clogging.
The shaft bearings are designed as standard in metal-to-metal pairs, which means that the valves can be used without any problems in high temperature applications.
All valves are supplied as standard with a graphite gland. Other materials are available.
Somas VSS / HT and MTV / HT valves are bi-directional and can therefore be installed in both directions.”