Awaiting product image

Two and multi-way ball valve for demanding applications

Categories: , ,

Additional information

Marken

Kitz Europe
Funktion

On-off valves
Industrie

Energy, Petroleum, chemical, Plant engineering & construction, Pulp & paper, Steel, Sugar, starch
Anwendung

Abrasive media, Chemical resistance, High pressure, High temperature, Low temperature/ cryogenic, Media containing solids, Pulp & paper applications, Steam and energy
Nenndruck

ANSI, 150, 300, 600, 900, 1500, PN, 10, 16, 25, 40, 63, 100, 160, 250
Betriebstemperatur

High temperature, Low temperature, Standard temperature

Related products

    Ball valve

    Type SKV / SKVT (Somas)
    Pressure: 40
    Nominal size: 25-500

    “Due to the spring-loaded seat construction, Somas ball valves offer good tightness regardless of the differential pressure.

    The Somas ball valves type SKV are full bore valves with nominal diameters from DN25 – DN400 and have a floating ball (floating design) with spring-loaded seats.
    Ball valves with nominal diameters from DN450 – DN500 have a ball (trunnion mounted) which is guided up and down in bushes and is called a valve type SKVT.
    “

    Add Bookmark

    Soft seated, forged monobloc ball valve

    Type 400 / 41500 (JC Valves)
    Pressure: 240bar
    Nominal size: 3/8" - 2"
    "The JC Valves type 400 and 41500 is a forged monoblock ball valve that can also be used for high pressures up to 240 bar. The standard version of the soft seated monoblock ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. The valve can be designed with both bolted and welded ends. Thanks to a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), this monoblock ball valve can be used in virtually all industries. A large selection of materials opens up a wide range of applications. "
    Add Bookmark

    3-way ball valve, soft seated, compact design

    Type Typ FT4 / FT6 / FZ4 / FZ6 (Adler)
    Pressure: '10 - 64 / 150 - 600
    Nominal size: 8 - 150

    Due to its compact design, the Adler 3-way ball valve is a space-saving variant of the flanged 3-way ball valves.

    The ball is fully bored and can be designed with an “L” or “T” bore. The valve is made of steel or stainless steel and can be produced as a wafer design ball valve or with female thread.

    Add Bookmark

    DIN flanged ball valve, semi trunnion, long/short pattern series

    Type 1516 / 1540 / 1316 / 1340 (JC Valves)
    Pressure: 40bar
    Nominal size: 200 - 300
    "The JC Valves type 1516 / 1540 / 1316 and 1340 are flanged ball valves according to DIN with a trunnion bearing in long or short pattern. This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating ball valve and those of the trunnion ball valve and fills the gap between the two. It is important to note that the seat in these models is not live loaded and is therefore not innately pressed onto the ball. The standard version of the DIN flanged ball valve with a trunnion mounted ball includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. The large variety of materials opens up a wide range of applications for this series. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. "
    Add Bookmark