Additional information
| Marken | ERHARD |
|---|---|
| Funktion | On-off valves |
| Anwendung | Hydropower, Water & waste water |
| Industrie | Energy, Water, waste water |
| Nenndruck | PN, 10, 16, 25, 40 |
| Betriebstemperatur | Standard temperature |
Ball valve
Related products
Soft seated, no dead space, fully welded ball valve
(Peter Meyer)
Pressure: PN 10 - PN 40 ANSI 150/300
Nominal size: 10-150
“Soft seated, fully welded, minimized cafity flanged ball valve with various approvals.
Due to its design, the fully welded ball valve can also be supplied as a bottom outlet valve.
The connection ends can be designed to suit the customer’s requirements. In addition, many other design options can be selected. “
DIN flanged ball valve, semi trunnion, long/short pattern series
Type 1516 / 1540 / 1316 / 1340 (JC Valves)
Pressure: 40bar
Nominal size: 200 - 300
"The JC Valves type 1516 / 1540 / 1316 and 1340 are flanged ball valves according to DIN with a trunnion bearing in long or short pattern.
This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating ball valve and those of the trunnion ball valve and fills the gap between the two.
It is important to note that the seat in these models is not live loaded and is therefore not innately pressed onto the ball.
The standard version of the DIN flanged ball valve with a trunnion mounted ball includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing.
The large variety of materials opens up a wide range of applications for this series.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. "
Compact ball valve, soft seated
Type FA1 / FA2 / FB1 / FB2 / FC1 / FC2 (Adler)
Pressure: 10 - 160 / 150 - 1500
Nominal size: 10 - 250
Due to its compact design, the compact Adler ball valve (Type FA1/FB1/FC1/FA2/FB2/FC2) is a space-saving variant of the flanged way ball valves.
The valve is made of steel or stainless steel and can be produced as a wafer or flanged ball valve. Depending on the type, the valve is made of cast or solid material.
The compact Adler ball valve is used in all industries.
3-way ball valve, soft seated, compact design
Type Typ FT4 / FT6 / FZ4 / FZ6 (Adler)
Pressure: '10 - 64 / 150 - 600
Nominal size: 8 - 150
Due to its compact design, the Adler 3-way ball valve is a space-saving variant of the flanged 3-way ball valves.
The ball is fully bored and can be designed with an “L” or “T” bore. The valve is made of steel or stainless steel and can be produced as a wafer design ball valve or with female thread.